Topa Sofa, Seat & Side Table

SOFÁ with and withour arms:                                
Structure made of 4 legs in steel powdercoated of 25x15x1,5mm.                                
Seat in plywood of 10mm and cut foam of 40 kg/m3                                
Back with tubular steel structure and cut foam of 35 kg/m3                             
Arms  in 10mm plywood and cut foam of 60 kg/m3                                
Glides in plypropylene                         
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct or chrome finish, composition: 98.4% NI, 1.6% CR, 24.4 micron thickness and UNE EN ISO 2409-96 adhesion, Classification 0 
Upholstery seat only or fully upholstered.  See manufacturers' specifications for fabrics.

SIDE table                          
Structure made of 4 legs in steel powdercoated of 25x15x1,5mm.                        
Glides in plypropylene                             
Top 20mm melamine or 20mm wood veneer.                             
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct or chrome finish, composition: 98.4% NI, 1.6% CR, 24.4 micron thickness and UNE EN ISO 2409-96 adhesion, Classification 0