Gorka Polyamide

Stackable polyamide chair with and without arms.
Side structures high-pressure die-cast aluminium. Quality: UNE L-2630. Injection pressure = 1,000 MT.
Shell crystalline polymer polyamide and fiberglass (polyamide 6 + 35% fiberglass), injection pressure: 1,000 MT.
Foam seat cushions with 35 kg/m3 density and 20mm thickness; glued using eco-friendly waterborne adhesive.
Glides polyamide 6 + 35% fiberglass.
Metallic finishes epoxy/polyester paint with a thickness of 50-90 microns depending on the colour, ISO 2409 Gt 0 adhesion and ASTM 2794 impact 2.5 joules reverse & direct or polished.
Upholstery seat only or seat and back. See manufacturers' specifications for fabrics.

< Collections/Gorka/Gorka Polyamide

Technical sheet

Measures

Gorka Polyamide

Specs

Product weight:

Without arms 7,6kg
With arms 7,9kg

Packaging information:

610x730x1080mm

Number of stackable chairs:

10 units non upholstered / 8 units upholstered
14 units non upholstered in trolley / 12 units upholsterd in trolley

Number of chairs per box:

Footage for upholstered versions (COM):

(Footage for 1 unit, for more than units contact factory)
Seat and back 0,54ml / 10 feet

Sustainability & quality certificates

Product certificates

ANSI/BIFMA X5.1:2011
UNE EN 11010 Resistencia, durabilidad y seguridad. Strenght, durability and safety. Résistance, durabilité et sécurité.
BS 4872.1-85 BS4875.2-85 Resistencia, durabilidad y seguridad. Strenght, durability and safety. Résistance, durabilité et sécurité.
ISO 14006 Ecodesign.
EPD (Declaración medioambiental de producto, Environmental product declaration).

Origin and warranty

Manufacturing

Manufactured in Spain

Warranty

5 Years

Accesories

Felt Glides - 270/A

Desk Tray - 263D / 263I

Desk tray in white or black compacmel on the arm.

Transport and Storage Trolley - 264/A

14 uds non upholstered / 12 uds upholstered
It will be powder coated black unless the client indicates another colour from the AKABA paint sample card.

Linking Device

Telescopic linking device, concealed beneath the seat.

Akaba Quality

At AKABA, we see manufacturing as an essential part of our commitment to responsible design and continuous improvement. All our products are developed in accordance with the ecodesign requirements of ISO 14006, incorporating environmental considerations from the earliest stages of product design and development through to the end of their life cycle.

This approach enables us to develop more efficient, durable and easily recoverable solutions by prioritizing materials and processes that contribute to reducing the environmental impact of our manufacturing activities.

In addition, AKABA maintains a management system certified to ISO 9001 and ISO 14001, ensuring the quality of our processes and products while supporting an environmental management approach focused on prevention, control and the continuous improvement of our environmental performance.

The integration of design, manufacturing and sustainability defines our approach to furniture: creating products that enhance well-being in the spaces where they are used, while being responsibly manufactured and aligned with today’s environmental challenges.

Materials

Wood

Wood and wood-based materials sourced from European suppliers and controlled sources. FSC and PEFC certification available on request, subject to material type. Renewable, reusable and recyclable materials, depending on their composition. Highly durable and suitable for material recovery at the end of their service life.

Metals: Steel and Aluminum

Steel is the most recycled material in Europe, with recycling rates exceeding 80%. Aluminum typically contains between 30% and 40% recycled content and achieves recycling rates of up to 95% at the end of its service life. Both materials are 100% recyclable without any loss of their properties.

Epoxy Coatings

High-durability powder coatings. All coatings are lead-free and meet AKABA's sustainability requirements, in line with the EcoVadis assessment framework. They reduce maintenance requirements and extend the product's service life. Suitable for the recovery of the metal substrate during recycling processes at the end of the product's service life.

Polypropylene

Recyclable thermoplastic material. Selected products in the range are manufactured from 100% recycled polypropylene. Lightweight, durable and suitable for industrial injection molding processes. All versions are recyclable at the end of their service life.

Upholstery

Our fabric selection is based on aesthetic, functional and environmental criteria. We collaborate with European suppliers that operate certified environmental management systems and give preference to fabrics carrying certifications such as the EU Ecolabel. Our textile collections incorporate recycled fibers, natural materials and treatments that are safe for both people and the environment.

Foams

Our upholstered products incorporate flexible polyurethane and viscoelastic foams designed to provide comfort, ergonomics and long-lasting performance. A large proportion of these foams are OEKO-TEX certified, ensuring compliance with strict standards regarding harmful substances and user safety.

Table Tops

Table tops are available in melamine, HPL, compact laminate or wood. We work with European suppliers that provide proof of European origin and, where applicable, FSC certification upon request. These materials offer high mechanical and chemical resistance, with recyclability depending on their composition, while prioritizing long service life.

Packaging

Packaging is made from cardboard and other recyclable materials. We are progressively increasing the use of recycled materials, including plastic bags made from 100% recycled plastic. Packaging volumes are optimized to reduce the environmental impact of transport and logistics. All packaging materials are 100% recyclable and can be easily separated for disposal through conventional recycling streams.